The 6234XL makes overlocking so easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated.
The rolled hem conversion feature eliminates the need to change the needle plate, presser foot or tension setting. Restructured lower looper guides allow easy access.
The colour-coded guides mean that threading the 6234XL for 2, 3, or 4 thread overlocker really is as easy as 1, 2, 3!!
Easy rolled hem change over
No need to change the needle plate for rolled hemming. Just slide the needle plate setting knob to the "R" position to switch the chaining finger to the rolled hemming position.
2 thread overlocking
Set your overlocker for 2 thread use by sliding thread guide from 3 or 4 thread position to 2 thread position and attach spreader to right looper.
Lower looper threading
By rotating the threading lever, the lower looper thread guides will be accessible, making threading easy. Turn the balance wheel and the threading lever will return to its original position.
The upper knife can be quickly and easily deactivated when not required.
Adjustable cutting width
Easily adjust the cutting width to suit the thickness of the material. An easy way for correcting the seam tension.
The thread cutter is conveniently located on the side of the machine and trims the thread neatly and easily.
Lifting the presser foot automatically releases the tensions which allows you to easily draw the threads through when threading, just like a sewing machine.
The Janome 6234XL overlocker is the most advanced overlocker made by Janome. It has two needles and can be used as 2, 3 or 4 thread overlocking incorporating the differential feed ratio is adjustable from .05 to 2.25, providing increased control for handling all types of fabrics. Threading is simple, with colour coded guides and a self threading lower looper. The 6234XL switches to rolled hemming without changing the needle plate.
- 2 Thread / 3 Thread and 4 Thread Overlocking
- Machine Size: W320 x D290 x H280mm
- Maximum Stitch Length: 5mm
- Seam Width: 5.7mm
- Adjustable Cutting Width
- Retracable Upper Knife
- Colour Coded Threading Guide
- Lower Looper Easy Threading Mechanism
- Easy Rolled Hem Conversion (no plate change)
- Approx Weight: 8kg
- Lay in Tension Dials
- Seam Width (Standard): 3.55mm
- Maximum Sewing Speed: 1500 s.p.m, Rolled Hem: 2.0mm
- Differential Feed Ratio: 0.5 to 2.25
- Standard foot
- Small Lint Brush
- Needle Threader
- Screwdriver Large
- Screwdriver Small
- 4 Spool Caps
- 4 Spool Cone Holders
- 4 Spool Nets
- Spare Upper Knife
- Waste Chip Box
- Foot Control
- Instruction Book
- Instructional DVD